+86-0512-82691269   Whatspp: +86 18625257159

Product Category


4 Fiber terminal box

sharethis sharing button
1. Description:
1.It is used for different kinds of modules and applied to the working area subsystem.
2.It uses embedded surface frame, easy to install and disassemble
3.With application of fiber SC/LC simplex, duplex and other different environment installed plate or flush plate.

4. Cable management can be connected without cutting(with express port)
5.All modules are free of welding.


Item Technical data
Application 3.0 x 2.0 mm drop cable or indoor cable
Fiber diameter 125μm ( 652 & 657 )
Tight cladding diameter 250μm & 900μm
Mode of application Single mode & duplex mode
Tensile strength >50 N
End-use temperature -40~+85
Adaptor SC & LC
Insertion loss ≤0.2dB(1310nm & 1550nm)
output 4
3,Configuration table:

Model Size Max Capacity Packing Size
A*B*C(mm) SC LC 100 pcs
OTB-4F 100*80*29 4 8 50*45*30 cm
4. Installation:
Wall-mounted installation
Drill 2 holes over the wall based on the size in table 1,place the expansion boltΦ5.5*30,place the box to match up the holes and use bolt to fasten
Product Inquiry
Further contact with us!


Be the first to know about our latest products.


Quick link

Call us

Kunshan Kewei Fiber Communcations Equipment Co.,Ltd.

Tel: 0512-57873993
Fax: 0512-57873993
Mobile: +86 18625257159
Whatspp:+86 18625257159

 E-mail: janewang@keweifiber.com
Copyright  Kunshan Kewei Fiber Communcations Equipment Co.,Ltd. All rights reserved.