Product Category

9

FullAXS patch cord for Ericsson equipment

9

FullAXS patch cord for Ericsson equipment

The standard solution with discrete fiber and power cables supports every type of cell site installation. HUBER+SUHNER has leading role in the design and manufacturing of harsh environment connectors (e.g. ODC, FullAXS, Q-ODC or Q-XCO) and cable assemblies for remote radio systems.Suitable subunit for accommodating PatchCords, manifold cables or breakout cable like SMARTLINE or MASTERLINE.
FTTA feeders for all common RRH models and systems
Ruggedised design and installation proof
Standard assemblies and customised lengths available with short lead-time
Cable diameter 4.8 mm, 5.5 mm or 7 mm
All cables rodent resistant
All cable assemblies factory-terminated and tested
UL (OFNR) and Anatel approved cables available on request

Quantity:




Inquire Add to Basket

Product Description

Cable Specification

Jacket OD	4.8	mm
Tube OD	0.9	mm
Approx. weight	26	Kg/km

Cable mechanical properties

Tensile strength	during installation	450	N	IEC 60794-1-2 E1
	in service	300	N
Min. bend radius	during installation	83	mm	IEC 60794-1-2 E11
	in service	30	mm
Crush resistance	short-term	2000	N/cm	IEC 60794-1-2 E3
	long-term	600	N/cm
Water penetration	h=1m,24h,P<3m	passed		IEC 60794-1-2 F5B

Cable thermal properties

Temperature range	during installation	-40-+70	℃	IEC 60794-1-2 F1
	in service	-40-+90	℃
	in storage	-60-+70	℃

Cable combustion properties

Fire load		0.63	MJ/m
Fire propagation	on a vertical single cable	passed		IEC 60332-1-2
	on a vertical cable bundle	passed		IEC 60332-3-25

Optical characteristics single mode fiber

Fiber standard according to ITU-T		G.657.A2
Attenuation typical (in cable)	1310nm	≦0.35	dB/km
	1383nm	≦0.35	dB/km
	1550nm	≦0.21	dB/km
	1625nm	≦0.23	dB/km
Attenuation Maximum (in cable)	1310nm	≦0.4	dB/km
	1383nm	≦0.4	dB/km
	1550nm	≦0.25	dB/km
	1625nm	≦0.25	dB/km

Cable material details

Tight tube	Hytrel 7246
Reinforcement	Glass-roving water swellable
Jacket	PE/EVA (LSZH)

Cable properties
Metal free indoor and outdoor cable
Rodent-protected, glass-armoured
Low smoke, zero halogen and self-extinguishing
Low fire load for high safety requirement

Cable applications
For FTTA installation
For installation directly in the ground and in mechanically unprotected environments
For installation outdoor, in wet cable ducts and pipes
For installation in cable ducts
For high safety requirements in case of fire
LC connectors

Compliance	IEC 61754–20, TIA 604–10–A
Technology	full ceramic ferrule (1.25 mm) and sleeve
Mechanical resistance	100 N tensile load
Operating temperature	–40 °C to +85 °C
Flammability	UL 94 V–0
Durability	1000 mating cycles