LC uniboot patch cable with Push-Pull Tabs
Product Description
Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The patch cord can be used in interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths. Patch Cords include simplex, duplex and Multi-fibers assemblies.
As the networking environment of today becomes increasingly dependent on high speed and high density solutions, effective cable management is a real issue. The key concern is how to manage more cable in a smaller amount of space.
Our uniboot fiber patch cord reduces cable management space by up to 68% compared to standard patch cords. The patch cord utilizes a special “round duplex” cable that allows duplex transmission within a single 3mm cable. As a result of these features our uniboot patch cord offers improved airflow and visibility of equipment within a high density network environment. Our uniboot patch cord is available in a wide variety of cable materials including LSZH, Plenum and
Riser.
Optical Specification
| Connector | LC | ||
| Polishing | SM/UPC | MM/PC | SM/APC |
| Insertion Loss(max) | ≤0.30dB | ≤0.25dB | ≤0.30dB |
| Return Loss(min) | ≥50 dB | ≥35 dB | ≥60 dB |
| Tensile Strength | >70N | ||
| Durability | <0.20 dB typical change, 1000 matings | ||
| Repeatability | ≤0.1dB | ||
| Storage , Operating Temperature [°C] | -40~+85 | ||
Geometric Specification (For special request)
| | | PC End-face | APC End-face |
| Radius of Curvature | SC/FC/ST | 10~25 mm | 5~12 mm |
| LC/MU | 7~25 mm | 5~15 mm | |
| Apex Offset | ≤50 um | ||
| Fiber Spherical Height | +/- 50 nm | ||
| Angular Offset | —— | 8°± 0.2° | |
- Clean and Scratch-Free End Face
- Proportional geometric test is applied to the normal production.
- 100% interferometer check is available under special requirement.
Physical Information
Length tolerance: 0-5M: +5cm/-0cm ; 5-100m:+10cm/-0cm
Features:
- Cost effective
- Full duplex in a single 3mm diameter cable.
- Available in OM3, OM4, OS1/OS2 (ITU-T G.652D or G.657A1) or ITU-T G.657A2 cabled fiber
- types Available with LSZH, Plenum and riser rated cable
- Save 50%of space in cabinets and cable ways
- Protects network polarity
- Clean and Scratch-Free End Face
- Proportional geometric test is applied to the normal production.
- 100% interferometer check is available under special requirement
Application:
Fiber CATV, Fiber Cabling system, LAN,FTTH