Ceyear 6481A/B Optical Fiber Fusion Splicer (6-motor/4-motor) with Different Colors
Product Description
Main Characteristics
1. Small size, light weight
2. 7s fast splicing, 18s highly efficient heating
3. 700/320 times image magnification, 5mm fusing for ultra-short cleave length
4. 300 groups of splice modes, 100 groups of heating modes,10000 groups of fusion records/64 images storage
5. 10000 groups of fusion records /64 images storage
6. Ceramic presser foot, ceramic V-groove, all-in-one fixture
7. Dual-directional fusing, auto fusing, intelligent heat shrink
8. USB and SD card interface, auto update of U disk
9. Built-in modular lithium-ion battery, at least 220 counts of splicing and heating cycles
10. GUI (graphical user interface) and touch screen, convenient for operation
11. Dust-resistant, water-resistant, shock-resistant, greater environment adaptabilit
Technical Specification
1. Small size, light weight
2. 7s fast splicing, 18s highly efficient heating
3. 700/320 times image magnification, 5mm fusing for ultra-short cleave length
4. 300 groups of splice modes, 100 groups of heating modes,10000 groups of fusion records/64 images storage
5. 10000 groups of fusion records /64 images storage
6. Ceramic presser foot, ceramic V-groove, all-in-one fixture
7. Dual-directional fusing, auto fusing, intelligent heat shrink
8. USB and SD card interface, auto update of U disk
9. Built-in modular lithium-ion battery, at least 220 counts of splicing and heating cycles
10. GUI (graphical user interface) and touch screen, convenient for operation
11. Dust-resistant, water-resistant, shock-resistant, greater environment adaptabilit
Technical Specification
| Model Specification | 6481A | 6481B |
| Motor qty | 6 motors | 4 motors |
| Alignment method | Precise core alignment, Cladding alignment, Manual alignment | Cladding alignment, Manual alignment |
| Applicable fibers | Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657. | |
| Optical fiber diameter | Cladding: 80~150μm, coating layer: 0.1~3mm | |
| Cleave Length | 5~16mm (coated optical fiber diameter ≤ 250μm) 10mm (coated optical fiber diameter: 0.25~3mm) | |
| Splice loss(typical) | 0.02dB(SMF); 0.01dB(MMF); | 0.03dB(SMF); 0.02dB(MMF); |
| 0.04dB(DSF); 0.04dB(NZDSF) | 0.04dB(DSF); 0.04dB(NZDSF) | |
| Return Loss | Better 60dB | |
| Splicing time (typical) | 7s (Fast mode) | |
| Heating time (typical) | Less than 18s | |
| Tension test | 1.96~2.25N | |
| Protection sleeve | 60mm, 40mm and a series of protection sleeves | |
| Graphical display | High-performance 4.3 inch LCD | |
| Magnification time | 700 times/200 times | 320 times/88 times |
| Fusion records | 10000 groups/64 images | |
| Remote maintenance | N/A | |
| Battery capacity | 11.1V, ≥6400mAh | |
| Battery service life | Cycle charging: 300~500 counts, can be replaced by customers | |
| Electrode service life | Typical: 4000 counts, can be replaced by customers | |
| Construction lighting | Built-in lights with high-brightness and wide lighting area | |
| Working environment | Temp:-10~50ºC;Hum: 0~95%RH,height above sea level: 0~6000m | |
| Operation interfaces | GUI (graphical user interfaces) | |
| External power | AC: 100~240V, 60Hz, 0~1.5A; DC: 10~15V | |
| Port | USB / SD | |
| Dimensions | 120mm(W)×130mm(H)×154mm(D)(without rubber anti-vibration pad) | |
| Weight | 1.8kg (the battery not included), 2.1kg(included the battery) | 1.65kg (the battery not included), 1.95kg(included the battery) |