24 Fiber distribution box
Product Description
1. Description:
1.It is used for different kinds of modules and applied to the working area subsystem.
2.It uses embedded surface frame, easy to install and disassemble
3.With application of fiber SC/LC simplex, duplex and other different environment installed plate or flush plate
.
4. Cable management can be connected without cutting(with express port)
5.All modules are free of welding.
2.Specification
3.Configuration table
1.It is used for different kinds of modules and applied to the working area subsystem.
2.It uses embedded surface frame, easy to install and disassemble
3.With application of fiber SC/LC simplex, duplex and other different environment installed plate or flush plate
.
4. Cable management can be connected without cutting(with express port)
5.All modules are free of welding.
2.Specification
Item | Technical data |
Application | 3.0 x 2.0 mm drop cable or indoor cable |
Fiber diameter | 125μm ( 652 & 657 ) |
Tight cladding diameter | 250μm & 900μm |
Mode of application | Single mode & duplex mode |
Tensile strength | >50 N |
End-use temperature | -40~+85℃ |
Adaptor | SC & LC |
Insertion loss | ≤0.2dB(1310nm & 1550nm) |
output | 1 |
3.Configuration table
Model | Size | Max Capacity | Installation Size | |
A*B*C(mm) | SC | LC | D (mm) | |
24 Fiber | 345*270*95 | 24 | 48 | 190*298 |