2 fiber terminal box
Product Description
Description:
It is used for different kinds of modules and applied to the working area subsystem
With application of fiber SC/LC simplex, duplex and other different environment installed
plate or flush plate
Specification:
Item Technical data
Application 3.0 x 2.0 mm drop cable or indoor cable
Fiber diameter 125μm ( 652 & 657 )
Tight cladding diameter 250μm & 900μm
Mode of application Single mode & duplex mode
Tensile strength >50 N
End-use temperature -40~+85℃
Adaptor SC & FC
Insertion loss ≤0.2dB(1310nm & 1550nm)
output 2
Configuration table:
Model Size Max Capacity Installation Size
A*B*C(mm) SC LC PLC D (mm)
OTB-2F 83.4*130*24 1 2 4(LC) 159*80
Installation:
Wall-mounted installation
Drill 2 holes over the wall based on the size in table 1,place the expansion
bolt Φ5.5*30,place the box to match up the holes and use bolt to fasten
It is used for different kinds of modules and applied to the working area subsystem
With application of fiber SC/LC simplex, duplex and other different environment installed
plate or flush plate
Specification:
Item Technical data
Application 3.0 x 2.0 mm drop cable or indoor cable
Fiber diameter 125μm ( 652 & 657 )
Tight cladding diameter 250μm & 900μm
Mode of application Single mode & duplex mode
Tensile strength >50 N
End-use temperature -40~+85℃
Adaptor SC & FC
Insertion loss ≤0.2dB(1310nm & 1550nm)
output 2
Configuration table:
Model Size Max Capacity Installation Size
A*B*C(mm) SC LC PLC D (mm)
OTB-2F 83.4*130*24 1 2 4(LC) 159*80
Installation:
Wall-mounted installation
Drill 2 holes over the wall based on the size in table 1,place the expansion
bolt Φ5.5*30,place the box to match up the holes and use bolt to fasten