1 Fiber terminal box

Product Description

1. Description:
1.It is used for different kinds of modules and applied to the working area subsystem.
2.It uses embedded surface frame, easy to install and disassemble
3.With application of fiber SC/LC simplex, duplex and other different environment installed
plate or flush plate.
4. Cable management can be connected without cutting(with express port)
5.All modules are free of welding.
2.Specification
Item  Technical data
Application  3.0 x 2.0 mm drop cable or indoor cable
Fiber diameter  125μm ( 652 & 657 )
Tight cladding diameter  250μm & 900μm
Mode of application  Single mode & duplex mode
Tensile strength  >50 N
End-use temperature  -40~+85℃
Adaptor  SC & LC
Insertion loss  ≤0.2dB(1310nm & 1550nm)
output 1
3,Configuration table:
Model                Size              Max Capacity                 Installation Size
                    A*B*C(mm)          SC  LC                               D (mm)
OTB-1F      86*115*23              1    2                                      81
4. Installation:
Wall-mounted installation
Drill 2 holes over the wall based on the size in table 1,place the expansion
boltΦ5.5*30,place the box to match up the holes and use bolt to fasten

Contact

Rack Mount 24Port Patch Panel 48core 1U Fiber Optic Drawer Type Patch Panel

FTTH 86 type SC wall outlet optical subscriber socket 1 port fiber faceplate for apartment

Din rail FTTH face plate indoor connector box

Wall Face Plate Dual Fiber Optical SC Cable Connector Coupler Socket Faceplate

Panel De Parcheo SC 24/48Core Fiber Patch Panel 1U 19 inch ODF