SST cable drop type Single-Tube, Toneable, Gel-Filled Cable 1 F, Single-mode (OS2) Locatable Opti Tap Patch Cord
Product Description
Toneable mini LT Flat drop cable
Toneable mini Flat drop cable offers compact, durable, and easy to locate optical fiber solution in a really accessible construction. The fiber optic cable's webbed design allows the locating wire to be easily separated from the main cable sheath by hands, providing simple, rapid routing and grounding of the locating wire.
To construct the cable, up to 12 optical fibers are placed in a 2.0mm gel-filled buffer tube to creat a flexible, easy to access core. Then 2 FRP rods are placed diametrically opposite on either side of the fiber core, providing excellent crush resistance and tensile strength during installation and over the lifetime of cable. A 24AWG copper wire is aligned along the outside edge of one of the FRP rods to provide locatability The locating wire, strength member rods, and fiber core are then encapsulated in a durable PE jacket to create a flat cable cross section and lend added protection to the cable core. Between the locating wire and the adjacent FRP rods, the jacket forms a thin web that is easily separated by hand, allowing quick removal of the copper wire from the main sheath
Optical Specification
| Connector | LC,SC,ST,FC,MTRJ,MU | ||
| Polishing | SM/UPC | MM/PC | SM/APC |
| Insertion Loss(max) | ≤0.30dB | ≤0.25dB | ≤0.30dB |
| Return Loss(min) | ≥50 dB | ≥35 dB | ≥60 dB |
| Tensile Strength | >70N | ||
| Durability | <0.20 dB typical change, 1000 matings | ||
| Repeatability | ≤0.1dB | ||
| Storage , Operating Temperature [°C] | -40~+85 | ||
Geometric Specification (For special request)
| | | PC End-face | APC End-face |
| Radius of Curvature | SC/FC/ST | 10~25 mm | 5~12 mm |
| LC/MU | 7~25 mm | 5~15 mm | |
| Apex Offset | ≤50 um | ||
| Fiber Spherical Height | +/- 50 nm | ||
| Angular Offset | —— | 8°± 0.2° | |
- Clean and Scratch-Free End Face
- Proportional geometric test is applied to the normal production.
- 100% interferometer check is available under special requirement.
Physical Information: Length tolerance: 0-5M: +5cm/-0cm ; 5-100m:+10cm/-0cm
Features:
- Cost effective
- Full duplex in a single 3mm diameter cable.
- Available in OM3, OM4, OS1/OS2 (ITU-T G.652D or G.657A1) or ITU-T G.657A2 cabled fiber
- types Available with LSZH, Plenum and riser rated cable
- Save 50%of space in cabinets and cable ways
- Protects network polarity
- Clean and Scratch-Free End Face
- Proportional geometric test is applied to the normal production.
- 100%interferometer check is available under special requirement
Application:
Fiber CATV, Fiber Cabling system, LAN,FTTH